Ht-instruments HT9021 Instrukcja Użytkownika Pobierz pdf (Strona 14)

HT9021

EN - 13

4.3.6. Temperature measurement

CAUTION

Do not allow the temperature sensor to contact a surface that is energized

above 30 V RMS or 60 V DC, such voltages pose a shock hazard

Fig. 8: Taking Temperature measurement

1. Rotate the switch on Temp position

2. Pushing MODE key and select the kind of measure. “°C” or “°K” symbols are shown at

display respectively for Celsius or Farheneit temperature measurements

3. Insert the type K bead probe in VΩ CAP Temp and COM inputs terminals using

the standard adapter and observing the correct polarity (see Fig. 8). The temperature

value is shown at display

4. For HOLD and MAX/MIN features please refer to § 4.2

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

Brak uwag

Ht-instruments HT9021 Instrukcja Użytkownika Strona 14